The forum is in read only mode.

file still not hot

  • gregg
  • gregg's Avatar Topic Author
  • Visitor
  • Visitor
15 years 3 weeks ago #180 by gregg
still not hot was created by gregg
I have finally gotten inside my Krups 905 which is the same as a Saeco Vienna DeLuxe. The ready to brew light doesn't stop flashing so I can't make espresso and the water from the steam wand is cold. I bypassed the inline fuse and still am having the same problem. Any ideas? Thanks, Gregg
  • colin
  • colin's Avatar Topic Author
  • Visitor
  • Visitor
15 years 2 weeks ago #183 by colin
Replied by colin on topic Re:still not hot
Do you have access to an ohm-meter?
You can usually buy one at Radio Shack or
Circuit Source. Everyone should have one.
Tis possible that the heating elements are `open`..
You will also be able to measure whether there
is voltage or not with a Volt-Ohm-Ammeter.
You will be a tech in no time.
Do you have a digital camera?
Time to create page: 0.130 seconds