×

Notice

The forum is in read only mode.

file No Coffe Coming Out :(

  • Saeco Magic Cappucino
  • Saeco Magic Cappucino's Avatar Topic Author
  • Visitor
  • Visitor
13 years 10 months ago #2767 by Saeco Magic Cappucino
No Coffe Coming Out :( was created by Saeco Magic Cappucino
When I refilled the machine with water I forgot to close the compartment before using the machine. So I turned on the machine and the uptake tube sucked air instead of water and now my machine isn't working? Any help out there?
More
13 years 10 months ago #2768 by colin
Replied by colin on topic Re:No Coffe Coming Out
Yes - Saeco has a nifty little plastic priming tool that looks like a mini-Turkey baster... I guess in this case... a squab baster!
You fill it with water and squirt it into the intake under the reservoir.
You could try with a really turkey baster...
but your coffee might end up tasting like gravy!

Keep us posted.
  • Donavon
  • Donavon's Avatar Topic Author
  • Visitor
  • Visitor
13 years 10 months ago #2770 by Donavon
Replied by Donavon on topic Re:No Coffe Coming Out
I will try it now and let yo know what happens. I haven't missed having an espresso after I first wake up for yrs. Hopefully today is not the 1st.

Best.
  • Donavon
  • Donavon's Avatar Topic Author
  • Visitor
  • Visitor
13 years 10 months ago #2772 by Donavon
Replied by Donavon on topic Re:No Coffe Coming Out
I wonder...should I try to do this while the machine is trying to make the espresso (after I press the star button) or while it is just turned on in idle mode? Any suggestions?

Best
Donavon
More
13 years 10 months ago #2773 by colin
Replied by colin on topic Re:No Coffe Coming Out
Try to ventilate the unit with water while it is in standby --

NOT while it is brewing.
  • Donavon
  • Donavon's Avatar Topic Author
  • Visitor
  • Visitor
13 years 10 months ago #2774 by Donavon
Replied by Donavon on topic Re:No Coffe Coming Out
The machine is not taking the water when I am squirting it with the baster, no luck :( The pump/compressor is still making the same loud noise that it didnt use to make before this happened. Sounds louder I guess because there is no water going through it. One thing that I do not understand is why the priming tool still has water in it? If I squeeze it water comes out. Any suggestions?

Best
Time to create page: 0.125 seconds