×

Notice

The forum is in read only mode.

file Baratza Virtuoso grinder discussions

  • dave
  • dave's Avatar
  • Visitor
  • Visitor
14 years 2 months ago #1394 by dave
Replied by dave on topic Re:Baratza Virtuoso update
Colin said:

The good thing is that there are no obvious 'fines'...


As I recall, I obtained a larger quantity of very fine to fine grounds than I see in your photos (not easy photos to take, though). More grounds than 'fines' per se.

I won't be able to take a decent macro shot, so I won't pull my grinder apart again to reset the range and double-check. (I just had it apart for cleaning yesterday.)

Just to keep this in context:
Up to a medium grind, the Virtuoso grinds very well and very evenly. It is just that the usable range is compressed into the lower half of the available settings, with the upper half rapidly coarsening well beyond what you would expect.

Dave
  • colin
  • colin's Avatar Topic Author
  • Offline
  • Administrator
  • Administrator
More
14 years 2 months ago #1398 by colin
Replied by colin on topic Re:Baratza Virtuoso update
Spoke with Reg James today - of EspressoTec.Com

Of over 150 virtuoso`s sold in 3-4 monthes, one has come back as 'defective' - the complaint was:

"It is NOT grinding coffee... any coffee..."

Long story short: The DC Motor was wired backwards and was pushing the coffee up and out of the hopper!
Well, not literally - but you get the idea!
Time to create page: 0.107 seconds